RBXC_C | AS1013.112

Motion controller – equipped with CPU 586 4axes, 4 serial channel, 24VDC power supply for controlling the drives throught canbus fieldbus with one more canbus channel for remote I/O or device NET comunication
This product is replaced by the

Intel Pentium MMX microprocessor, 266 Mhz
Number of controlled axes:
- up to 8 interpolated axes, driven through CANopen fieldbus
Memory:
- Min 2Mbyte flash eprom card
- 64 Mbyte DRAM
- 128 Kbyte CMOS memory with battery back-up
Communication:
- # 2 general purpose RS232 serial channels
- # 2 general purpose RS422/485 serial channels
- # 1 RS422 channel interfacing Robox’s programming devices and/or Robox’s operator’s interfaces (see Programming devices)
- # 1 Canbus channel – DSP402 protocol to interface servo drives
- # 1 Canbus channel – DSP301 /Device Net protocols
- # 1 Ethernet channel 10Mbits/sec
Interfaces:
- # 16 digital, 24VDC opto-coupled, PLC compatible inputs (1 slow interrupting channel)
- # 16 digital, 24VDC, opto-coupled, PLC compatible outputs (8 channels: max 100mA, 8 channels: max 500mA)
Intrinsic safety watch dog relay (ZH1/457)
Programming:
- Robox RHLL language – for robotic applications and machine tools
- Robox R language – to solve any motion control problems
Multi-tasking capability
Teleservice via modem
Power supply: 230V AC (50W max)
External measures: mm. 200 x 290 x 265 – weight kg 5.8
The RBXE provides an extra slot where the user can install one of the boards listed at ‘Boards for stand-alone NC’s’